29
Required Parts
• Fuselage • Engine mount (2)
• Cowling • Fuel tank
• 6-32 locknut (4) • #6 washer (4)
• Clevis w/retainer • Throttle pushrod
• 3mm x 6mm screw • Thick foam
• 6-32 x 3/4" screw (4)
• 6-32 x 1
1
/
4
" screw (4)
• Pushrod connector w/backplate
• #2 x 1/2" sheet metal screw (4)
• 4-40 x 1/2" socket head screw
Required Tools and Adhesives
• Drill • Phillips screwdriver
• Drill bit: 5/64" (2mm), 5/32" (4mm)
Step 1
Mount the engine mount onto the firewall using four
6-32 x 3/4" screws.
Step 2
Position the engine on the engine mount so the drive
washer is 4" (102mm) ahead of the firewall.
Step 3
Mark the location of the engine mounting bolts using
a felt-tipped pen. Drill the engine mount using a 5/32"
(4mm) drill bit.
Section 7B: Glow Engine Installation
Comments to this Manuals