Hangar-9 Pulse XT 40 ARF User Manual download pdf (Page 31)

 Step 10

Locate the fuel tank. Hold the tank up to a strong light to

determine which direction the vent line is facing. This will

be the top of the tank. The red tube is attached to the vent

line of the tank. Place the tank inside the fuselage with the

vent towards the top of the fuselage.

 Step 11

Place the thick piece of foam into the fuselage to hold the

tank in position

Note: Remember the plane is upside

down right now, so the vent will be

facing down during installation.

 Step 12

Place the fuselage hatch into position and secure it using

the 4-40 x 1/2" socket head screw.

 Step 13

Trim the cowling as necessary to fit over the motor. The

cowl is mounted using four #2 x 1/2" sheet metal screws.

Install the propeller and spinner using the instructions

included with your particular motor.

Section 7B: Two-Stroke Engine Installation

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

No comments

Hangar-9 Pulse XT 40 ARF User Manual Page 31