Hangar-9 Pulse XT 40 ARF User Manual download pdf (Page 27)

 Step 4

Build a wiring harness for the batteries using a female

connector and two male connectors. Follow the wiring in

the photo so the motor sees the voltage increase of the

two batteries.

 Step 5

Solder the appropriate connectors onto the speed control.

 Step 6

Remove the covering from the bottom of the fuselage

as shown to allow for cooling air across the motor

and batteries.

 Step 7

Prepare the battery tray by applying two pieces of self

adhesive hook and loop to the battery tray. Start the hook

and loop directly behind the holes in the tray.

 Step 8

Position the hook and loop strap into the fuselage. Route

the strap through the fuselage bracing as shown.

Section 7A: Electric Motor Installation

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

No comments

Hangar-9 Pulse XT 40 ARF User Manual Page 27